- Accessories
- Amplifiers
- Cables
- Cartridges
- ADC - Analogue to Digital
- DAC's - Digital to Analogue
- Digital Players
- Digital Signal Conditioner
- Headphones
- HRT Music Streamers
- HRT STAGE Music System
- iDevice Accessories
- Lifestyle
- Loudspeakers
- Mains Conditioners
- Stands & Platforms
- Tuners
- March 2021 Specials
- Cable Special Offers
- Approved Pre-owned Equipment
- Approved Pre-owned Cables
- Vintage Hi-Fi
MD 90T SE (Special Edition) Analogue Valve FM Tuner
The new MD 90 SE and MD 90T SE FM Tuners include the features of their predecessors, plus a number of new features to heighten your listening experience.
New features include:
- Balanced output - This gives you studio quality output with higher gain and less signal loss.
- Precision Brass flywheel and clutch system - A 0.25 kilogram, 0.6 lb., brass flywheel is mounted on a precision machined brass shaft and bearing system along with a brass clutch that controls the tuning pot to add accuracy and weight when tuning.
- Kimber Hyper pure wire - Both the balanced and unbalanced audio outputs are wired with this premium 99.9999 % pure copper wire.
- Solen polypropylene audio capacitors and by-pass capacitors - The final audio stage uses these premium capacitors and by-pass caps to give you speed, inner nuances and dynamic open sound staging.
Specifications: |
|
Usable sensitivity (mono) |
10.3 dBf |
Usable sensitivity (stereo) |
11.2 dBf |
50 dB quieting sensitivity (mono) |
13.2 dBf |
50 dB quieting sensitivity (stereo) |
34.0 dBf |
Capture Ratio |
1.5 dB |
Image rejection |
75.0 dB |
signal to noise ratio (SNR) |
75.0 dB |
alternate channel - wide |
60.0 dB |
alternate channel - narrow |
80.0 dB |
adjacent channel - wide |
9.0 dB |
adjacent channel - narrow |
25.0 dB |
THD - mono |
0.10% |
THD - stereo |
0.18% |
stereo separation |
50.0 dB |
AM suppression |
70.0 dB |
SCA rejection |
-80.0 dB |
-3 dB frequency response |
20 Hz - 17 KHz |
Power required |
120/220/230/240 vac |
Dimensions |
19" (w) x 13" (d) x 4.25" (h) |
Weight |
12 lbs/5.3 kgs |
Standard faceplates (black) |
17"/45 cm |
Tube Specifications For Triode Series |
|
Filament Current |
(max) 330 mA (min) 270 mA |
Anode Current (1) |
(max) 1.07 mA (min) 0.92 |
Anode Current (2) |
(max) 1.07 mA (min) 0.92 |
Total Harmonic Distortion |
1.8 % |